AVE MV DR4000 Especificaciones descargar pdf (Pagina 3)

To place an order call 0845 600 9323 or e-mail [email protected]

VSI-PROMAX

LARGER MEMORY SPACE

ALL AVE INTERFACES IN ONE UNIT

FULL REMOTE PC OR DVR PROGRAMMING

NEW VIDEO PROCESSING CIRCUITRY

TILL INTERFACE

!0'$&(01$/,1$/%!"(,&

An additional serial port has been added to allow the

VSI-PROMax to have bi-directional communication

with any till emulating common printers, pole displays

or customer displays. This additional port can then

send the data to the Hydra / Regcom network or send

RS-232 or RS-485 directly to a serial port on the

DVR.

Optically isolated RS-232 input selectable has been

added to break the ground loop between the POS/

Cash Register and video system. This completely

seperates the POS / Cash register system from the

video system eliminating till or communication

problemsor video noise.

$14-/)(,&

With the built in Hydra, Regcom, Networker or

Vnetworker functions, the VSI-Pro Max can be a

complete POS / Cash Register interface plus be

configured as a Master (Hydra) or Slave (Regcom)

device for up to 16 tills. Therefore eliminating the use

of the stand alone Hydra, Regcom, Networker or

Vnetworker units. Just loop the RS-485 network from

one VSI-Pro Max to the next. All VSI-Pro Max will

then be configured as Regcom and the last in the

loop will be configured as a Hydra and connect to the

DVR. Diagnostic LEDs indicate the network active

and data from the till is being received to confirm

installation wiring.

The VSI-Pro Max is programmable for many 3rd

party DVR protocol for receiving data from POS /

Cash Registers with all the current supported Hydra

drivers. Programmability for backward compatibility

for all AVE network configurations for Hydra/Regcom,

Networker and Vnetworker.

(#$-

Video AGC circuitry has been added to compensate

for the new low light WDR cameras and UTP twisted

pair adapters that reduce the video level below the

standard 1V P-P. Therefore the VSI-Pro Max will

deliver a constant video level to the DVR in all

conditions maintaining stable text display. Video

Surge Suppression has been added along with an

isolated earth plug to prevent lightning surges as

well.

/-"$00-/

With the new 40 Mhz processing speed all the above

functions are possible. With the increased 128K

SRAM high speed buffering and processing is

possible with large data packet processing tills. With

the increased program memory of 128K, all AVE

POS, Cash Register, printer, pole displays, customer

displays, Scales, Money Counters, radars, GPS and

all drivers developed by AVE are in one convenient

unit.

-%14!/$

The VSI-Pro Max supports PC programming and

firmware updating. It is also compatible with the

Vnetworker protocol so can be programmed and

configured remotely via the AVE line of DVRs.

-4$/

The VSI-Pro Max as all VSIs uses standard

unregulated 12VDC. Full surge suppression on this

power line prevents interference of common power

supplies from effecting the interface, till or video

system.

$"'!,("!*

The VSI-Pro Max is housed in an electroplated metal

enclosure with powder coated paint for compliance

with all CE / FCC standards.

1 2 3 4 5 6 7 8 ... 39 40

Comentarios a estos manuales

Sin comentarios

AVE MV DR4000 Especificaciones Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) AVE MV DR4000